Deep Well Vertical Turbine Pump

Design
Parameters
Material
Testing

The deep well vertical turbine pump is a type of centrifugal pump used to transport fluid from an underground reservoir, it's driven by an above ground or submersible motor connected via a long vertical shaft to impellers at the bottom of the deep well pump.

Design & Structure Features

● Bearing lubricating is oil.

● Line-shaft bearing can be PTFE, Rubber, Thordon, Bronze, Ceramic, Silicon Carbide.

● Shaft seal can be gland packing seal or mechanical seal.

● Pump rotation is CCW viewed from drive end, CW is also available.

Performance Range

Capacity:100-30000m3/h
Head:6~250m
Power: 18.5~5600kw
Outlet dia: 150-1000mm
Temperature:-20℃ ~80℃
Range chart: 980rpm~590rpm

Performance Range

Capacity:100-30000m3/h
Head:6~250m
Power: 18.5~5600kw
Outlet dia: 150-1000mm
Temperature:-20℃ ~80℃
Range chart: 980rpm~590rpm

Pump Parts	For Clear Water	For Sewage	For Seawater
Discharge Elbow / Casing	Carbon Steel	Carbon Steel	S.S / Super Dulex
Diffuser / Suction Bell	Cast Iron	Cast Iron / Ductile Iron / Cast Steel / S.S	S.S / Super Dulex
Impeller / Impeller Chamber / Wear Ring	Cast Iron / Cast Steel	Ductile Iron / S.S	S.S / Super Dulex
Shaft / Shaft Sleeve / Coupling	Steel / S.S	Steel / S.S	S.S / Super Dulex
Guide Bearing	PTFE / Thordon
Remark	Final material depends on the liquid condition or the client's request.

Our testing center have beenauthorized a national second grade certificate of accuracy, and all the equipments were built up according to the international standard like ISO,DIN, and the lab could provide performance testing for varied kinds of pump , motor power up to 2800KW, suction diameter up to 2500mm.